Zack's Four Seasons Playground
Wellston Michigan
231-862-3700
SNOW
Wellston Michigan
231-862-3700
SNOW
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Gold Digger 60° Carbide Traction Master
NEW THE 1.325" AND THE 1.450" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED.
The standard all other studs are compared with. A sharp 60° carbide tip gives you superb traction and durability on hard-pack snow and ice. Most snowmobilers need added traction, so be serious about it, buy Gold Digger® Traction Master® studs. The 5/16" has a 1" head and the 7mm has a 7/8" head. Both are through-hardened and heat treated.
NEW THE 1.325" AND THE 1.450" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED.
The standard all other studs are compared with. A sharp 60° carbide tip gives you superb traction and durability on hard-pack snow and ice. Most snowmobilers need added traction, so be serious about it, buy Gold Digger® Traction Master® studs. The 5/16" has a 1" head and the 7mm has a 7/8" head. Both are through-hardened and heat treated.
Grand Master™
NEW THE 1.325" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED.
OEM TESTED AND APPROVED FOR SINGLE PLY TRACKS ONLY.
Woody's Grand Master™ with a larger 1.200 head provides a larger anchor to distribute pressure over a wider area on the single ply track.
The Grand Master™ is available in two stud lengths, 1.075. with standard nuts and the 1.325 with ALN2-4500 Big Nuts in package in quantities of 12, 24, 84 and 500.
TORQUE SPEC--Grand Master studs must be torqued to 20 ft. lbs. Woody's also has an Indexing Tool available to align square Grand Digger™ support plates.
Template studding patterns for single ply tracks will be available for *2.52, 2.86 and 3.00 pitch tracks.
You must use this stud if you have a single ply track. This stud cannot be used in a traditional 2 ply track. Contact your dealer to determine if you have a single ply track.
*2.52 pitch tracks must use the square aluminum large Digger® support plates.
TORQUE SPEC--Grand Master studs must be torqued to 20 ft. lbs. Woody's also has an Indexing Tool available to align Grand Digger™ support plates.
Template studding patterns for single ply tracks will be available for *2.52, 2.86 and 3.00 pitch tracks.
You must use this stud if you have a single ply track. This stud cannot be used in a traditional 2 ply track. Contact your dealer to determine if you have a single ply track.
*2.52 pitch tracks must use the square aluminum large Digger® support plates
NEW THE 1.325" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED.
OEM TESTED AND APPROVED FOR SINGLE PLY TRACKS ONLY.
Woody's Grand Master™ with a larger 1.200 head provides a larger anchor to distribute pressure over a wider area on the single ply track.
The Grand Master™ is available in two stud lengths, 1.075. with standard nuts and the 1.325 with ALN2-4500 Big Nuts in package in quantities of 12, 24, 84 and 500.
TORQUE SPEC--Grand Master studs must be torqued to 20 ft. lbs. Woody's also has an Indexing Tool available to align square Grand Digger™ support plates.
Template studding patterns for single ply tracks will be available for *2.52, 2.86 and 3.00 pitch tracks.
You must use this stud if you have a single ply track. This stud cannot be used in a traditional 2 ply track. Contact your dealer to determine if you have a single ply track.
*2.52 pitch tracks must use the square aluminum large Digger® support plates.
TORQUE SPEC--Grand Master studs must be torqued to 20 ft. lbs. Woody's also has an Indexing Tool available to align Grand Digger™ support plates.
Template studding patterns for single ply tracks will be available for *2.52, 2.86 and 3.00 pitch tracks.
You must use this stud if you have a single ply track. This stud cannot be used in a traditional 2 ply track. Contact your dealer to determine if you have a single ply track.
*2.52 pitch tracks must use the square aluminum large Digger® support plates
Mega-Bite® 60° Carbide Stud
NEW THE 1.325" AND THE 1.450" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED.
THE 1.575" AND THE 1.740" PACKAGES HAVE THE ALN2-7000 BIG NUTS INCLUDED.
The unique design of four flat sides on the penetration portion of the tough 5/16" shank provides additional contact surface for added acceleration, deceleration and directional control under changing trail conditions. Professional snocross racers love the enhanced controllability the 60° carbide tipped Mega-Bite® delivers. For trail riding, the Mega-Bite® is available in lengths of .875" through 1.450". For snocross racing, lengths of 1.575" and 1.740" are available.
NEW THE 1.325" AND THE 1.450" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED.
THE 1.575" AND THE 1.740" PACKAGES HAVE THE ALN2-7000 BIG NUTS INCLUDED.
The unique design of four flat sides on the penetration portion of the tough 5/16" shank provides additional contact surface for added acceleration, deceleration and directional control under changing trail conditions. Professional snocross racers love the enhanced controllability the 60° carbide tipped Mega-Bite® delivers. For trail riding, the Mega-Bite® is available in lengths of .875" through 1.450". For snocross racing, lengths of 1.575" and 1.740" are available.
Signature Series™
NEW THE 1.325" AND THE 1.450" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED.
Woody's combines the advantages of stainless steel with their performance proven designs at a competitive price! The high corrosion resistance allows you to use the Signature Series™ in rigorous environments. The stainless steel combined with the 5/16" shank and the 15/16" head of the Signature Series™ is resistant to impact even at extreme temperature variations ensuring you a reliable grip on the trail with the 60° carbide tip. Available in popular lengths of 1.000", 1.075", 1.175", 1.325" and 1.450" in
NEW THE 1.325" AND THE 1.450" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED.
Woody's combines the advantages of stainless steel with their performance proven designs at a competitive price! The high corrosion resistance allows you to use the Signature Series™ in rigorous environments. The stainless steel combined with the 5/16" shank and the 15/16" head of the Signature Series™ is resistant to impact even at extreme temperature variations ensuring you a reliable grip on the trail with the 60° carbide tip. Available in popular lengths of 1.000", 1.075", 1.175", 1.325" and 1.450" in
60° Degree Steel Traction Master®
This 7mm stud with a 60° point and a 7/8" head is effective on hard-pack snow and ice. It is offered in lengths of .875" and 1.000 in a 48 piece package.
This 7mm stud with a 60° point and a 7/8" head is effective on hard-pack snow and ice. It is offered in lengths of .875" and 1.000 in a 48 piece package.
Steel Chisel Tooth™
NEW THE 1.325", 1.630" and the 1.860" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED.
The tough and dependable Chisel Tooth™ is a workhorse. This stud penetrates like a pointed stud but acts like a scooper with a flat surface for traction.
This stud is offered to the trail rider in lengths of 1.075" and 1.205" with a 5/16" shank and a 1" head in packages of 48. In addition, for competition, Woody's also offers a lighter 7mm with a 7/8" head in lengths of .750" through 1.200". New this year are lengths of 1.630" and 1.860" with a 15/16" head. All are available in packages of 48 pieces with lock nuts.
NEW THE 1.325", 1.630" and the 1.860" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED.
The tough and dependable Chisel Tooth™ is a workhorse. This stud penetrates like a pointed stud but acts like a scooper with a flat surface for traction.
This stud is offered to the trail rider in lengths of 1.075" and 1.205" with a 5/16" shank and a 1" head in packages of 48. In addition, for competition, Woody's also offers a lighter 7mm with a 7/8" head in lengths of .750" through 1.200". New this year are lengths of 1.630" and 1.860" with a 15/16" head. All are available in packages of 48 pieces with lock nuts.